Shackle-pins-and-bushes, ironman 4×4 suspension was the first company in the world to recognize the importance of greasable shackles and pin kits. the reason for the introduction of greasable kits was that polyurethane bushes will provide extra long life if they are greased.. Replacing shackle bushes on a isuzu truck, i used this easy hack to change the bushes and it only cost $5 in bits from the hardware shop. i found it impossible without doing this suspension hack ..., lovells shackles and pins are manufactured using finest quality and are case hardened to 0.2mm to provide greater resistance to wear, thus increasing pin and bush life. machined load bearing surfaces allow for increased dispersion and coverage of grease, which greatly improves performance and reduces shackle and pin deterioration..
"making it easy for you! call 1800 100 390. engineering. machining stock. 1020 1045 hex, round & square; 4140 hex, round & square, greasable shackles and pins enable the easy re-greasing of polyurethane spring bushes. all ironman 4x4 shackles and pins are: quad-outlet greasable greasable shackles providing an easy method of re-lubricating polyurethane bushes. quad-outlet ports distribute grease liberally along the bush surface ensuring you minimise wear of the bush and maximise the serviceable life of them..
The shackle supports the rear of the spring allowing it to pivot on the frame of your vehicle. over time, the bushing can wear and the shackles can rust. vehicles that see a lot of hard driving, such as off road trucks and race cars that use leaf springs, can actually break shackles or bolts., kenworth suspension parts. we carry a full range of suspensions parts for kenworth front and rear suspensions. we have pins, u-bolts, shackle kits, shocks, hangers, bolts and bushings.. Find many great new & used options and get the best deals for full greasable spring shackle pin kit suits 75 series hj75 hzj75 fzj75 fj75 at the best online prices at ebay!, hi, tonight on my ke15 i wanted to put my new bushes i had recived for the car in now a lot of people can find this hard so i thought id post up a way i did it that was easy and can be done with limited tools. well first off tool list: (this is a rought guid i used this but others may not need so....
3" front lift kit tough dog adjustable shocks strut spacers lift coils front upper control arms with extended ball joints rear extended shackles a grease boot is torn an bottom shock bushes are average, can be swapped with your ones already have and they'll be good to go in d40 nissan navara